S2 disc pads VX811C
Organic disc pads for Clarks S2 hydraulic systems. Remove the caliper from the frame prior to fitting. Keep disc pad surfaces clean from contaminates. All Service work should be carried out by a fully qualified cycle mechanic
-
-
SKELETAL/S2 rotor bolt 120030002
Torx headed bolt for the use with 6 point mounting hubs. Bags of 6
-
SKELETAL/S2 M6 bracket bolt GB/T20.2
5mm allen key headed bolt. 18mm in length Bag of 2
-
SKELETAL/S2 washer GB/T97.1
Washer/Spacer for use with bracket bolts. Bag of 4
-
SKELETAL/S2 split C clamp 120031003
Split C clamp for use with both SKELETAL and S2 lever assemblies
-
SKELETAL/S2 split C bolt 120031004
Allen key headed bolt for use when fitting SKELETAL lever Bag of 2
-
SKELETAL/S2 Straight line connector 31203001/31203002/120030051/GB3452.1
For use when reducing the length of the hose at the lever end. Suitable for use with the SKELETAL and S2 systems. Always consult Clarks instruction guidelines prior to fitting. Will require some specialist hose cutters and then DOT4 fluid for rebleeding.
-
SKELETAL/S2 Bleed Nipple 120012019/763152051
Fits both SKELETAL and S2 hydraulic systems. After fitting the system will require bleeding, refer to hydraulic bleed instructions
-
SKELETAL/S2 lever bolt 120031006/120031102
Fits both SKELETAL AND S2 hydraulic systems. 2 x 4mm allen keys are required to tighten.
-
SKELETAL/S2 reservoir cover bolt 120031076
Torx headed bolt, compatible with SKELETAL and S2 systems Bag of 2
-
S2 reservoir cover 120071002
For S2 brake systems only. Ensure surface are clean from dirt or damage prior to fitting. Will require 2 x reservoir cover bolts.
-
SKELETAL/S2 pad spacer 120010053
A vital componant to prevent accidental closure of the pistons when the wheel is removed. Bag of 2
-
S2 diaghragm 120011056
With the cover removed the shaped diaghragm can be removed and/or replaced, prior to fitting check for any signs of damage or splitting.
-
S2 Lever Assembly 120031005
S2 lever assembly. Can be easily fitted with the removal of the retaining bolt and subsequent lever adjuster being turned clockwise until the lever end is released
-
SKELETAL/S2 160mm (IS) front bracket 120032008B
160mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
-
SKELETAL/S2 160mm (IS) rear bracket 220032008B
160mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
-
SKELETAL/S2 180mm (post mount) bracket 220032008C
180mm Post Mount caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
-
SKELETAL/S2 180mm is front bracket 120032008E
180mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
-
SKELETAL/S2 180mm is rear bracket 220032008D
180mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
-
SKELETAL/S2 185mm post mount bracket 120032008C
185mm Post Mount caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
-
SKELETAL/S2 185mm(IS) front bracket 220032008A
185mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
-
SKELETAL/S2 185mm (IS) rear bracket 120032008A
185mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
-
SKELETAL/S2 203mm (post mount) bracket 120032008D
203mm Post Mount caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
-
SKELETAL/S2 203mm (IS) front bracket 120032008
203mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
-
SKELETAL/S2 203mm (IS) rear bracket 220032008
203mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
-
SKELETAL/S2 (Post mount) bolt M6X32 120030005B
POST MOUNT bracket bolts 32mm long. Ensure the correct spacers are used when fitting.
-
SKELETAL/S2 (Post mount) bolt M6X38 120030005C
POST MOUNT bracket bolts 38mm long. Ensure the correct spacers are used when fitting.