Sintered disc pads for Clarks SKELETAL hydraulic systems. Remove the caliper from the frame prior to fitting. Keep disc pad surfaces clean from contaminates. All Service work should be carried out by a fully qualified cycle mechanic
Torx headed bolt for the use with 6 point mounting hubs. Bags of 6
5mm allen key headed bolt. 18mm in length Bag of 2
Washer/Spacer for use with bracket bolts. Bag of 4
Split C clamp for use with both SKELETAL and S2 lever assemblies
Allen key headed bolt for use when fitting SKELETAL lever Bag of 2
For use when reducing the length of the hose at the lever end. Suitable for use with the SKELETAL and S2 systems. Always consult Clarks instruction guidelines prior to fitting. Will require some specialist hose cutters and then DOT4 fluid for rebleeding.
Fits both SKELETAL and S2 hydraulic systems. After fitting the system will require bleeding, refer to hydraulic bleed instructions
Fits both SKELETAL AND S2 hydraulic systems. 2 x 4mm allen keys are required to tighten.
For SKELETAL brake systems only. Ensure surface are clean from dirt or damage prior to fitting. Will require 2 x reservoir cover bolts.
Torx headed bolt, compatible with SKELETAL and S2 systems Bag of 2
SKELETAL lever assembly, includes bite adjustment mechanism. Can be easily fitted with the removal of the retaining bolt and subsequent lever adjuster being turned clockwise until the lever end is released
With the cover removed the shaped diaghragm can be removed and/or replaced, prior to fitting check for any signs of damage or splitting.
160mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
160mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
180mm Post Mount caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
180mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
180mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
185mm Post Mount caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
185mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
185mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
203mm Post Mount caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
203mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
203mm International Standard caliper bracket. Ensure it is fitted the right way round and uses Clarks bracket bolts and spacers to secure.
POST MOUNT bracket bolts 32mm long. Ensure the correct spacers are used when fitting
POST MOUNT bracket bolts 38mm long. Ensure the correct spacers are used when fitting